Gravimetric Control System for Powder

GMSP-N Series 

1.   Extrusion throughput and weight per meter control to remain product quality;

2.   Shorten start-up time, save raw material, reduce the dependence on the operator’s skill or experience;

3.   Raw material saved by 1-5% and production yield increased by 5%;

4.   Continuous material save to enable 2 months investment return;

5.   100% automatic control/dual control functions to control extruder and haul off simultaneously;

6.   7”TFT touch screen display unit, dynamic display of control process;

7.   Optimized structure of feeding port specialized for powder and spherular material with good flowability(typical application: <20% CaCo3);

8.   Auto-compensation for the change caused by bulk density;

9.   Quick release design for weigh bin;

10.   Visual discharge outlet;

11.   Auto filling control.

*Calculate based on special throughout and control status 

GMSP-D Series 

1.   Extrusion throughput and weight per meter control to remain product quality;

2.   Shorten start-up time, save raw material, reduce the dependence on the operator’s skill or experience;

3.   Raw material saved by 1-5% and production yield increased by 5%;

4.   Typical accuracy error：+/-0.1~0.5%;

5.   Continuous material save to enable 2 months investment return;

6.   100% automatic control/dual control functions to control extruder and haul off simultaneously;

7.    7”TFT touch screen display unit, dynamic display of control process;

8.    Optimized structure of feeding port specialized for powder and spherular material with good flowability, no special limit;

9.    Auto-compensation for the change caused by bulk density;

10.   Quick release design for weigh bin;

11.   Visual discharge outlet;

12.   Screw quick release and clean   ;                 

13.   Multiple feeding screw applicable for different types of material;

14.   Auto filling control.

GMSP-N Series

GMSP-D Series